Joint Stock Company
Версия на русском Sitemap


Reissue of The Certification Body’s

This summer the Certification Body of JSC "EREC" received a new certificate of accreditation No. ОИАЭ.RU.043 (ОС) (The Order of The State Atomic Energy Corporation ROSATOM from 14.09.2017 No. 1/878-П "On the reissue of the accreditation certificate of the JSC "EREC").

The Certification Body of JSC "EREC" performs work on confirmation of conformity of the products for which the requirements for safety in the field of nuclear power use are set and with the mandatory requirements within the scope of accreditation which was expanded this time.

Certificate of Accreditation is valid from September 14, 2017 until September 14, 2022.

Certification of management system

Recently JSC "EREC" successfully certified its management system according to ISO 9001:2015 in Certification body for systems and personnel, TÜV Thüringen e.V., Germany.

The Certificate № TIC 15 100 179961 (valid from: 2017-08-31 until 2020-08-30) proves the conforming application with the regulation in accordance with TIC auditing and certification procedures.

The scope of The Certificate allows JSC "EREC" to perform activities in the field of the use of atomic energy as follows:

  • research and development;
  • development, design, engineering design, manufacturing, adjustment, maintenance and repair of technological systems and control systems;
  • provision of engineering services.

The delegation of JSC “EREC” participated in the IX-th International Scientific and Technical Conference “Safety Assurance of NPP with VVER” (ISTC-2015). The Conference was held from May 19 to 22 in ОКB “GIDROPRESS” (Podolsk) in association with State Atomic Energy Corporation “Rosatom”.
248 experts from 14 countries, two international organization’s delegation (IAEA and WANO) design as well as experts of engineering and research institutes, representatives of machinery plants, NPPs and several higher education establishments met to exchange an experience at safety assurance of VVER-reactors. A wide spectrum of safety issues was covered, such as discussion of calculational-theoretical and experimental works aimed at safety enhancement, equipment improvement and service life extension of NPP with VVER RP as well as innovative development of VVER RP in the frame of “Generation-III+” and “Generation-IV” programs.
179 papers on urgent problems of safety assurance of VVER NPP, including 14 papers discussed at plenary sessions, were presented at the Conference.
JSC “EREC” experts were involved in the work of the Conference:

  • Eduard BOLTENKO addressed the theme: “Determination of steam flow rate in NPP’s pipelines by velocity gauge”.
  • Sergey NIKONOV presented the report “Experimental researches of hydraulic friction and levelling capacity of submerged perforated sheet in PGV test facility (EREC)”.
  • Yury PARFENOV presented the topic “Validation and improvement of the STEG code on the basis of the experimental data, obtained at PGV test facility.Calculation analysis of the tests at the PGV test facility”.

From 21 to 23 of May 2014 JSC “EREC” took part in IX International Scientific and Technical Conference “Safety, Efficiency and Economics of Nuclear Power Industry” (ISTC-2014).
There were about 1000 of Russian and foreign experts from 16 countries representing different organizations and enterprises of nuclear power industry. They met at discussion platform organized by JSC “Rosenergoatom” Concern on a base of JSC “VNIIAES” (Moscow) to exchange an experience and information on key topical issues of NPP operation and prospects of nuclear power development. The Conference participants discussed achieving of modern nuclear power industry at following areas:

  1. NPP operation with VVER, RBMK, BN, EGP-6 types of reactor;
  2. Emergency preparedness and radiation shield;
  3. Nuclear power units life extension and their upgrade;
  4. Radiation safety and ecology;
  5. RW and SNF management;
  6. Development and economics of nuclear power industry in Russia.

JSC “EREC” experts represented two reports:

  • Investigations for justification of process heat reliability (departure from nucleate boiling) of FA operation in RBMK-1000 FC of larger diameter with regard of possible distortions
  • Test Facility for research erosive and corrosive wear

Electric Laboratory of JSC «EREC»
Automation of Non–standard Objects and Systems
Supply of WCMCS
Certification Body
Testing Laboratory